Multiplexing and demultiplexing of optical orbital angular momentum (OAM) are critical operations in mode-division multiplexing communications. Traditional Dammann gratings, spiral phase planes, and optical geometric transformations are regarded as convenient methods for OAM mode (de)multiplexing. However, crosstalk between the different modes and the difficulty of mode multiplexing greatly limit their application to mode-division multiplexing communications. Here, using a set of inversely-designed phase planes, we demonstrate an OAM (de)multiplexer based on multiphase plane light conversion that can enable perfect OAM multiplexing communication. The sorted patterns are Gaussian-like and can be coupled easily into single-mode fiber arrays. Inputs from the fiber array are turned into coaxial OAM modes after the phase planes. OAM mode crosstalk generated by the multiplexer is less than -20dB, with insertion loss of less than 2.6 dB. OAM modes are sorted by the demultiplexer with mode crosstalk below -10dB, and the sorting results are coupled to the fiber array. OAM modes carrying 10 Gbit/s on–off keying signals were transmitted in a 5 km few-mode fiber. The measured bit-error-rate curves have power penalties of less than 10 dB. The proposed configuration is highly efficient and convenient and will be beneficial for potential applications in quantum information, information processing, and optical communications.

Stokes vector direct detection is a promising, cost-effective technology for short-distance communication applications. Here, we design and fabricate a spin-dependent liquid crystal grating to detect light polarization states. By separating the circular and linear components of incident light, the polarization states can be resolved with accuracy of up to 0.25°. We achieved Stokes vector direct detection of quadrature phase-shift keying (QPSK), 8PSK, and 16-ary quadrature amplitude modulation signals with 32, 16, and 16 GBd rates, respectively. We integrated the system, including the grating, photodetectors, and optical elements, on a miniaturized printed circuit board and demonstrated high-speed optical communications with 16 GBd rate QPSK signals.

Polarization imaging finds applications in many areas, such as photoelasticity, ellipsometry, and biomedical imaging. A compact, snapshot, and high-efficiency imaging polarimeter is highly desirable for many applications. Here, based on a single multifunctional geometric phase optical element (GPOE), a new method is proposed for high-efficiency snapshot imaging polarimetry. With tailored spatially varying orientation of each anisotropic unit cell, the GPOE works highly efficiently as both a spin sorter and a half-wave plate, enabling snapshot retrieving of a full Stokes vector of incident light. The designed GPOE is implemented in the form of liquid crystal fabricated with a photo-alignment technology, and its application in imaging polarimetry is experimentally demonstrated by retrieving full Stokes parameters of a cylinder vector beam. This method can also work in the form of plasmonic or dielectric metasurfaces, enabling ultra-compact polarization detection systems by monolithic integration with other devices such as metalenses.

The digital micro-mirror device (DMD)-based optical switch has the advantages of high-speed channels reallocation, miniaturization, stability, and large capacity for short reach optical communication in the datacenter. However, thermal turbulent atmosphere in the datacenter would cause perturbations and channel crosstalk for the optical switch. The self-healing optical beams such as the Bessel beams have the non-diffraction property to mitigate the turbulence issue. Here, we propose and demonstrate a Bessel beams enabled DMD-based optical switch to improve the stability and performance of optical communication in turbulent atmosphere. We statistically characterize the beam wanders of the Gaussian and Bessel beams in turbulent atmosphere at temperatures of 60°C and 80°C. We build the two-channel optical switch communication system and measure the bit error rate of the 15 Gbit/s on–off keying signals transmitted by the Gaussian and Bessel beams at temperatures of 60°C and 80°C, respectively. The optical switch using the Bessel beams shows lower bit error rates with weaker fluctuations compared with the Gaussian beams. The DMD-based optical switch using the Bessel beams has the potential for practical optical communication applications in the datacenter.